WaxNoMor

Introducing the WAXNOMOR Family of Products

The WaxNoMor family of products is a proprietary 2-part, solvent free, waterborne, polyurethane, wear-layer with very low VOC’s that beats the most stringent US standards manufactured by Dr. Schutz, LLC.

FAMILY: WAXNOMOR – SLIPNOMOR – MARKNOMOR

These products were developed to meet the maintenance challenges of resilient, commercial and industrial flooring. This revolutionary product takes the hassle out of maintaining current hard surfaces including Epoxy, Stone and Concrete.
NEVER Strip or Wax the Floor AGAIN!!

  • Saves Money and Time
  • Conserves Energy and Water
  • Solves Maintenance Problems
  • More Cost Effective day-to-day maintenance
  • Adds Slip Resistance to existing floors
  • Adds Stain Resistance to existing floors
  • Proven to extend the lifetime of floor use
  • 3 Year Wear Warranty

The WaxNoMor Family of products consists of 3 different products that each have their own distinct advantages.

WAXNOMOR

and

SLIPNOMOR

– 3 Gloss Levels

Without Waxnomor, extreme use and wear, and dirt particles can cause permanent damage to the surface structure.

Without Waxnomor, extreme use and wear, and dirt particles can cause permanent damage to the surface structure.

MATTE (Gloss Level of 8)
SATIN  (Gloss Level of 18-22)
GLOSS (Gloss Level of 65)

MARKNOMOR

is only offered in Satin (Gloss of 28)

GLOSS LEVELS:

WAXNOMOR ESD – 3 gloss levels, making existing floors static, dissipative or conductive.
MARKNOMOR – 1 gloss level
SATIN – (Gloss Level of 28) Used in environments where staining from rubber tires, chemicals used in hair salons or where disinfectants are imperative in operating rooms.  These things permanently damage untreated floors.
MAXNOMOR/MARKNOMOR PLUS – (offered only in matte) for heavy use areas that may also require superior stain resistance.

SOME BENEFITS:

  • Can potentially bring you a savings of up to 40-60% in material and labor when compared to conventional strip/polish regimes over the life of the floor.
  • Reduce water consumption,
  • Reduce electricity consumption
  • Eliminates caustic waste generated during the removal of existing waxes and polishes

WAXNOMOR

WAXNOMOR provides 50% overall savings in maintenance and renovation costs when compared with traditional stripping and waxing.

WAXNOMOR provides a 40 micron wear-layer that protects your floor 6 times longer as compared to traditional floor finishes against friction damage; such as, scuffing and scratches and makes your floor easier to clean.

WAXNOMOR also offers extremely low VOC release and water usage compared to traditional methods. It is 100% free of solvents and thus offers the highest protection, without harming human health or damaging the environment.

WAXNOMOR fulfills the requirements for DIN 18032 for sports floors. You can even add company or school logos and designs to your floor’s surface for effective facility branding.

WAXNOMOR – 3 Gloss Levels

MATTE (Gloss Level of 8)
SATIN Gloss Level of 18-22)
GLOSS (Gloss Level of 65)

Waxnomor ESD wear layer protects the surface while preserving its conductivity.

Waxnomor ESD wear layer protects
the surface while preserving its conductivity.

WAXNOMOR ESD

WAXNOMOR is offered in 3 gloss levels, making existing floors static, dissipative or conductive.

WAXNOMOR fulfills the requirements for DIN EN 61340-5-1 on conductive floors and areas with ESD requirements.

WAXNOMOR PLUS

WAXNOMOR PLUS is offered only in matte and is for in heavy use areas that may also require superior stain resistance.

WAXNOMOR PLUS is the solution for extremely scratch sensitive floors.

WAXNOMOR Plus wear-layer is ideal for

  • Schools, kindergartens, beach areas where there is sand exposure
  • Entry level areas with extremely high levels of traffic
  • Dark surfaces and, therefore, scratch sensitive floors (especially LVT design floors)

WAXNOMOR PLUS BENEFITS:

  • Proven to extend the lifetime of floor use
  • Long-term protection from wear and tear
  • Economic as well as eco friendly

The WAXNOMOR products are SUITABLE for:

  • PVC floors
  • LVT floors
  • Linoleum
  • Self-leveling cementitious floors
  • Resin* floors
  • Glazed, Polished Stone Floors and Ceramic Tiles* (*Not all floors of this category can be protected with polyurethanes, please contact us to find out if the floor in question has been tested and approved.)

Surface without Slipnomor ensures a Non-slip surface

SLIPNOMOR

SLIPNOMOR – 3 Gloss Levels

MATTE (Gloss Level of 8)
SATIN Gloss Level of 18-22)
GLOSS (Gloss Level of 65)

Images below of our SLIPNOMOR SolidStepCote 04 transparent anti-slip coating (ON THE RIGHT-HAND HALF OF EACH PHOTO) shown on Crema Marfil Spanish marble.

Conforms to ADA and OSHA slip requirements wet and dry.

  • Wet Pendulum Test Value (PTV) slip resistance suitable for pool decks, shower rooms, outdoor walkways and stairs, hospital bathrooms, etc.
  • Available for foot traffic in 24 hours
  • No odor – Dries clear, colorless, glossy

SOME BENEFITS:

  • SLIPNOMOR guarantees extra high safety underfoot in accordance with ASTM D2 047-00, ANSI B101.1, R 10 and BS-797602.
  • Fulfills stricter healthy and safety requirements
  • Various Classes of anti-slip surface (R19 and R10)
  • Free choice of floor design compared to conventional safety floors

MARKNOMOR

MARKNOMOR is 100% resistant to plasticizers, whether in car tires, mats or furniture. Also ensures that the surface is protected by a higher resistance against chemicals; such as hair dyes.

MARKNOMOR for HEALTHCARE facilities is resistant to stains from Betadine and like products, blood and other highly staining products. Great for use in difficult-to-clean areas such as; Emergency Rooms, Operating Rooms, Endoscopy Areas, etc.

Floor CARE INSTRUCTIONS Using Dr. Schutz Cleaners

Maintenance and Cleaning Recommendations USING Dr. Schutz Cleaners

Schutz Cleaner: Is a special active cleaner for use on new floors immediately after installation and for routine everyday cleaning of floors factory cured with a polyurethane finish, as well as vinyl, linoleum, or rubber floor coverings treated with Waxnomor, Slipnomor, Marknomor and Colorize finishes. Schutz Cleaner has excellent dirt-binding properties, even in the case of grease and oil spills. Schutz Cleaner causes no damage to the floor surface, does not leave a film. The Cleaner contains surfactants that fill in the micro scratches caused by grit and keep the floor looking new.

Schutz Disinfectant Cleaner: Liquid concentrate for cleaning all water resistant surfaces for application in the domestic and public health sector, as well as in the food and feeding sector (registration no. N-10532). Disinfectant Cleaner works as a bactericide and virucide (e.g.; to hepatitis-B and HIV viruses). Certified according to the guidelines of the DGHM list and the DVG.

Maintaining and Daily Cleaning of Schutz Finished Floors

Mop and Bucket Cleaning

  1. Dilute Schutz Cleaner in ratio of 1:200 (3/4 ounce to 1 gallon of water) and wipe over the floor using this solution with a clean string mop.
  2. It is important to use 2 buckets during cleaning. One bucket with the diluted Cleaner mixture and one bucket with clean water to rinse your dirty mop between applications of the Schutz Cleaner. The rinse bucket prevents the cleaning solution bucket from becoming contaminated during cleaning.
  3. Change out the rinse bucket water with clean water when it becomes too dirty to rinse the mop properly.
  4. Always ring the mop out to remove the excess liquid.
  5. Heavily soiled areas may require additional cleaning. Repeats steps 1-4.

Machine Cleaning

  1. Allow floor coating to cure for at least one week before cleaning by mechanical means (e.g.: sweeper, scrubber, disc machine).
  2. Use bassine, nylon brushes or white pads on your new floor coating. Polypropelene or abrasive bristly (Tynex) brushes or pads can cause premature loss of gloss.
  3. The Cleaner concentration can be reduced to 1:400 (1/4 ounce to 1 gallon of water) when using a fully automatic cleaning appliance.

Additional Recommendations
On-going cleaning and care and further measures for maintenance (such as, “walk off mats,” chair and table feet/floor protection, since walk off mats are designed to catch dirt, grease, grime which can be harmful to floors) are to be carried out by the Client according to Complete Floor Care Solutions, Inc., instructions for surfaces supplied by the Applicator, specific to the building where floors have been coated with Complete Floor Care Solutions, Inc., Specialty Surface Coatings.

Floor CARE INSTRUCTIONS Using Non-Specific Cleaners

Maintenance and Guidelines – Non-Specific Cleaners

Maintenance Guidelines/Care Instructions

  • Allow floor coating to cure for at least one week before cleaning by mechanical means (e.g.: sweeper, scrubber, disc machine, etc.).
  • Proper maintenance will increase the life and help maintain the appearance of your new Dr. Schutz floor coating. Remove spills quickly as certain chemicals may stain and could possibly permanently damage the finish.
  • Use bassine, nylon brushes or white pads on your new floor coating. Polypropelene or abrasive bristly (Tynex) brushes or pads can cause premature loss of gloss.

Detergents

There is a full range of NEUTRAL detergents available (general purpose to heavy duty) for your cleaning needs. For assistance in determining which detergent is right for your facility or for additional technical information, call (813) 961 1088.

Warning:

The use of solvents (Keytones and Esters), bleach (Chlorine), Alkalies, or organic acids is NOT RECOMMENDED.

CAUTION

  • Avoid scratching or gouging the surfaces.  All floor coatings will scratch if heavy objects are dragged across the surface.
  • Do not drop heavy or pointed items on the floor as this may cause chipping or concrete popouts in the case of weak cap.